HistoryBefore the development of tracers, gunners would rely on seeing their bullet impacts to adjust their aim. However, these were not always visible. In the early 20th century, ammunition designers developed "spotlight" bullets, which would create a flash or smoke puff on impact to increase their visibility. However, these projectiles were deemed in violation of the Hague Convention's prohibition of "exploding bullets."[1] This strategy was also useless when firing at aircraft, as there was nothing for the projectiles to impact on if they missed the target. Designers also developed bullets that would trail smoke. However, these designs required an excessive amount of mass loss to generate a satisfactory trail. The loss of mass en route to the target severely affected the bullet's ballistics. The British introduced a tracer version of the .303 cartridge in 1915.[2] The US introduced a 30-06 tracer in 1917.[3] ConstructionA tracer projectile is constructed with a hollow base filled with a pyrotechnic flare material, often made of phosphorus or magnesium or other bright burning chemicals. In US and NATO standard ammunition, this is usually a mixture of strontium salts and a metal fuel such as magnesium. This yields a bright red light. Russian and Chinese tracer ammunition generates green light using barium salts. Tracers can never be a totally reliable indicator of a gunner's aim, since all tracer rounds have different aerodynamics and even weight from ordinary rounds. Over long ranges, the stream of tracer rounds and the stream of ordinary rounds will diverge radically, especially given that a tracer bullet's mass decreases over time, because the tracer material in its base burns and vaporizes. Although advances in tracer design have diminished this problem, it still exists in modern ammunition. TypesThere are three types of tracers: bright tracer, subdued tracer and dim tracer. Bright tracers are the standard type, which start burning immediately after exiting the muzzle. A disadvantage of bright tracers is that they give away the shooter's location to the enemy; as a military adage puts it, "tracers work both ways'". Bright tracers can also overwhelm night-vision devices, rendering them useless. Subdued tracers burn at full brightness after a hundred or more yards to avoid giving away the gunner's position. Dim tracers burn very dimly but are clearly visible through night-vision equipment. A recent patent U.S. Patent Application 20040099173 covers the use of an LED and capacitor, instead of a pyrotechnic compound, in an attempt to stop the tracer being seen from the front. As an additional benefit, such tracer rounds would keep a constant mass during their flight and thus, keep to a more predictable trajectory. Furthermore, an LED and capacitor would probably be able to emit light considerably longer than conventional tracer bullets can; 7.62 x 51 mm and 7.62 x 54 mm tracers burn out at 800 meters, and 5.56 x 45 mm and 5.45 x 39 mm tracers burn out at 300 meters or less. The M856 tracer cartridge (63.7-grain bullet) is used in the M16A2/3/4, M4-series, and M249 weapons (among other 5.56-mm NATO weapons). This round is designed to trace out to 875 yards and has a red tip (orange when linked 4 to 1 with the M249). It is not to be used in the M16A1m except under emergency conditions and at ranges of less than 90 meters, because the M16A1's rifling twist is not sufficient to stabilize the projectile. The M196 tracer cartridge (55-grain bullet) is another tracer round for 5.56 NATO weapons, but it is just used for training purposes. It has a red tip and is designed to trace out to 500 yards. The M16A2 rifle has a rifling twist of 1 in 7" to stabilize the M856 tracer rounds (since the M856 is slightly longer than the M196). See alsoExternal links
References
| |