Derivation of Second Harmonic GenerationThe simplest case for analysis of second harmonic generation is a plane wave of amplitude E(ω) traveling in a nonlinear medium in the direction of its k vector. A polarization is generated at the second harmonic frequency where 2deff = χ(2).The wave equation at 2ω (assuming negligible loss and asserting the slowly varying envelope approximation) is where Δk = k(2ω) − 2k(ω). At low conversion efficiency (E(2ω) < < E(ω) the amplitude E(ω) remains essentially constant over the interaction length, l. Then, with the boundary condition E(2ω,z = 0) = 0 we get
In terms of the optical intensity,
This intensity is maximized for the phase matched condition Δk = 0. If the process is not phase matched, the driving polarization at 2ω goes in and out of phase with generated wave E(2ω) and conversion oscillates as sin(Δkl / 2). The coherence length is defined as Second Harmonic Generation with DepletionWhen the conversion to second harmonic becomes significant it becomes necessary to include depletion of the fundamental. One then has the coupled equations:
where * denotes the complex conjugate. For simplicity, assume phase matched generation (Δk = 0). Then, energy conservation requires that
where c.c. is the complex conjugate of the other term, or
Now we solve the equations with the premise E(ω) = | E(ω) | eiφ(ω) E(2ω) = | E(2ω) | eiφ(2ω) We get
Using
we get
If we assume a real deff, the relative phases for real harmonic growth must be such that e2iφ(ω) − iφ(2ω) = i. Then
or I(2ω,l) = i(ω,0)tanh2(Γl), where Γ = ωdeffE0 / nc. From I(2ω,l) + I(ω,l) = I(ω,0), it also follows that I(ω,l) = I(ω,0)sech2(Γl). Types of SHGSecond harmonic generation occurs in two types, denoted I and II. In Type I SHG two photons having ordinary polarization with respect to the crystal will combine to form one photon with double the frequency and extraordinary polarization. In Type II SHG, two photons having orthogonal polarization will combine to form one photon with double the frequency and extraordinary polarization. For a given crystal orientation, only one of these type of SHG occurs. Second Harmonic Generation MicroscopyIn biological and medical science, the effect of second harmonic generation is used for high-resolution optical microscopy. Due to the phase-matching condition only non-centrosymmetric structures are capable of emitting SHG light. One such structure is collagen, which is found in most load-bearing tissues. Using a short-pulse laser such as a femtosecond laser and a set of appropriate filters the excitation light can be easily separated from the emitted, frequency-doubled SHG signal. This allows for very high axial and lateral resolution comparable to that of Confocal microscopy without having to use pinholes. SHG microscopy has been used for extensive studies of the Cornea2 and Lamina cribrosa sclerae3, both of which consist primarily of collagen. Other UsesSecond harmonic generation is used by the laser enthusiast industry to make green 532nm lasers from an 808nm source. The source is converted to 1064nm by a Nd:YAG crystal, then fed through a KDP second harmonic crystal. This is capped by an infrared filter to prevent leakage of any infrared that would be harmful to the human eyes. Historical noteGenerating the second harmonic, often called frequency doubling, is also a process in radio communication; it was developed early in the 20th century, and has been used with frequencies in the MHz range. References
External linksArticles on Second Harmonic Generation
Companies involved with SHG generation and products
| |