Sailing hydrofoil

Sailing hydrofoil
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Sailing_hydrofoil".

A sailing hydrofoil or hydrosail is a sailboat with wing-like foils mounted under the hull. As the craft increases its speed the hydrofoils lift the hull up and out of the water, greatly reducing wetted area, resulting in decreased drag and increased speed. A sailing hydrofoil can achieve speeds exceeding two times the wind speed.

Both monohull and multihull sailboats can be retrofitted with hydrofoils, although greater stability can be achieved by using the wider planform of a catamaran or trimaran.

content

1 Typical configurations
2 Production designs
3 Experimental designs
4 See also
5 References
6 External links
- 6.1 Manufacturers

Typical configurations

Some multihulls use three foils; two main forward foils provide lift so that the boat "flies" while a horizontal foil on the rudder is trimmed to drive and control attitude. On catamarans, a single main foil can be attached between the hulls just in front of the center of gravity and at 2 degrees of incidence, spanning the tunnel with supporting struts. Hydrofoil catamarans are also called foilcats.

Multihull sailboats can also employ hydrofoils only to assist performance. Just as daggerboards and rudders are foils that enhance the control of a boat, assisting hydrofoils provide lift to the hull to reduce the wetted area without actually lifting the boat completely out of the water.

Monohull boats typically employ a "ladder" arrangement of hydrofoils splayed out with a dihedral angle of 50 degrees, with a stabilizing rudder foil. One of the earliest examples is the Monitor boat from 1957.^[1] This design offers the advantages of maximum lifting foil area at slow speeds and less at higher speeds, with rolling resistance arising from the dihedral support of the outboard ladder foils.

Production designs

TriFoiler

In the 1990s the Hobie Cat company manufactured the TriFoiler (no longer in production), a twin-sail trimaran with a mainsail on each outrigger capable of 30-knot speeds in typical sailing conditions. The prototype of the Hobie TriFoiler, called Longshot, was developed by Dan and Greg Ketterman in conjunction with Russell Long. Though more streamlined than the Trifoiler and having smaller hydrofoils, Longshot still holds the Class A speedsailing record of 43.55 knots on a 500 meter course, set in Tarrifa Spain in 1993. Until recently, it was the only existing speedsailing record held by a hydrofoil, but the recent records of Hydroptère have added to the list with record breaking runs across the English Channel.^[2]

WindRider Rave

In 1998, WindRider LLC introduced the WindRider Rave,^[3], a popular two-person trimaran hydrofoil capable of lifting off in as little as 12-13 knots of wind. The Rave is capable of sailing between 1.5 to 2 times wind speed.^[4] The boat's mainsail has no boom. The Rave broke new ground in the development of flapped foils and control systems.

International Moth

Rohan Veal sailing a Bladerider

The most widespread use of hydrofoils in sailboats to date has been in the International Moth class. Andy Paterson of Bloodaxe boats on the Isle of Wight is widely considered to have developed the first functional foiling Moth, though his boat had three foils in a tripod arrangement. Brett Burvill sailed a narrow skiff Moth with inclined surface-piercing hydrofoils to a race win at the Moth World Championships in 2001 in Australia, which was the first time a hydrofoil Moth had won a race at a World Championship. This hydrofoil configuration was later declared illegal by the class, as it was felt to constitute a multihull, which is prohibited by class rules. Subsequently, Garth and John Ilett in Perth, Australia developed a two-hydrofoil system for the moth with active flap control for the main foil via a surface sensor. John's company Fastacraft was the first to produce a commercially available International Moth. Fasta Craft's Prowler design, superseded in 2008 by the F-Zero, features a carbon-fiber hull, inverted "T" foils on the centerboard and rudder, and it can reach speeds of over 27 knots. Fasta Craft has since been joined in producing hydrofoil Moths by several other companies, including Bladerider, Velociraptor, and Aardvark Technologies.

Although initially debated fiercely within the class, the adoption of hydrofoils has proven a success for the International Moth class, with rapid fleet growth in the years since 2001. All World Championships since 2004 have been won by hydrofoil-equipped Moths, which can become foilborne in as little as six knots of breeze with an experienced helm of lighter weight. The class rule remains open to development of all boat components including hydrofoil systems, and development within the class continues to be spurred by both commercial and individual/amateur efforts.

Experimental designs

L'hydroptère experimental hydrofoil.

Many non-production experimental designs have been built. Some examples of notable designs are:

The French experimental Hydroptère has set numerous speed records. The boat attained a record speed of 47.6 knots^[5] with a goal of breaking the "50 knot barrier" in 2008.^[6]
A Hobie 18 foilcat prototype called Kangalope with foil kits attached.^[7]
Rich Miller's hydrofoil sailboard.^[8]