Postfix notation
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Postfix_notation".

content
Prefix notation
Infix notation
Postfix notation

Reverse Polish notation (or just RPN) by analogy with the related Polish notation, a prefix notation introduced in 1920 by the Polish mathematician Jan Łukasiewicz, is a mathematical notation wherein every operator follows all of its operands. It is also known as Postfix notation and is parenthesis-free.

The Reverse Polish scheme was proposed by F. L. Bauer and E. W. Dijkstra in early 1960s to reduce computer memory access and utilize the stack to evaluate expressions. The notation and algorithms for this scheme were enriched by Australian philosopher and computer scientist Charles Hamblin in the mid-1960s.

Most of what follows is about binary operators. A unary operator for which the Reverse Polish notation is the general convention is the factorial.

Contents

Explanation

In Reverse Polish notation the operators follow their operands; for instance, to add three and four one would write "3 4 +" rather than "3 + 4". If there are multiple operations, the operator is given immediately after its second operand; so the expression written "3 − 4 + 5" in conventional infix notation would be written "3 4 − 5 +" in RPN: first subtract 4 from 3, then add 5 to that. An advantage of RPN is that it obviates the need for parentheses that are required by infix. While "3 − 4 * 5" can also be written "3 − (4 * 5)", that means something quite different from "(3 − 4) * 5", and only the parentheses disambiguate the two meanings. In postfix, the former would be written "3 4 5 * −", which unambiguously means "3 (4 5 *) −".

Interpreters of Reverse Polish notation are often stack-based; that is, operands are pushed onto a stack, and when an operation is performed, its operands are popped from a stack and its result pushed back on. Stacks, and therefore RPN, have the advantage of being easy to implement and very fast.

Note that, despite the name, reverse Polish notation is not exactly the reverse of Polish notation, because for a non-commutative operation the operands are still written in the conventional order (e.g. "6 3 /" in reverse Polish corresponds to "/ 6 3" in Polish notation, these both evaluating to 2). Numbers are of course also written with the digits in the conventional order.

Practical implications

  • Calculations occur as soon as an operator is specified. Thus, expressions are not entered wholesale from right to left but calculated one piece at a time from the centre outwards. This results in fewer operator errors when performing complex calculations.citation needed
  • The automatic stack permits the automatic storage of intermediate results for use later: this key feature is what permits RPN calculators easily to evaluate expressions of arbitrary complexity: they do not have limits on the complexity of expression they can calculate, unlike typical scientific calculators.
  • Brackets and parentheses are unnecessary: the user simply performs calculations in the order that is required, letting the automatic stack store intermediate results on the fly for later use. Likewise, there is no requirement for the precedence rules required in infix notation.
  • In RPN calculators, no equals key is required to force computation to occur.
  • RPN calculators do, however, require an enter key to separate two adjacent numeric operands.
  • The machine state is always a stack of values awaiting operation; it is impossible to enter an operator onto the stack. This makes use conceptually easy compared to more complex entry methods.
  • Educationally, RPN calculators have the advantage that the user must understand the expression being calculated: it is not possible to simply copy the expression from paper into the machine and read off the answer without understanding. One must calculate from the middle of the expression, which makes life easier but only if the user understands what they are doing.
  • Reverse Polish notation also reflects the way calculations are done on pen and paper. One first writes the numbers down and then performs the calculation. Thus the concept is easy to teach.

Disadvantages

 The neutrality of this section is disputed.
Please see the discussion on the talk page. (June 2008)
Please do not remove this message until the dispute is resolved.
  • The widespread use of infix electronic calculators using (infix) in educational systems can make RPN impractical at times due to rigid teaching methods; but once learned, most users of RPN find that it is faster and easier to calculate expressions,citation neededwho? particularly the more complex ones, than with a conventional scientific calculator. It is also easy for a computer to convert infix notation to postfix, most notably via Dijkstra's shunting yard algorithm - see converting from infix notation below.
  • When writing RPN on paper, a job that is very rarely needed, adjacent numbers have to have a space between them. This requires clear handwriting to prevent confusion (for instance, 12 34 + could look a lot like 123 4 +).

The postfix algorithm

The algorithm for evaluating any postfix expression is fairly straightforward:

  • While there are input tokens left
    • Read the next token from input.
    • If the token is a value
      • Push it onto the stack.
    • Otherwise, the token is a function. (Operators, like +, are simply functions taking two arguments.)
      • It is known that the function takes n arguments.
      • If there are fewer than n values on the stack
        • (Error) The user has not input sufficient values in the expression.
      • Else, Pop the top n values from the stack.
      • Evaluate the function, with the values as arguments.
      • Push the returned results, if any, back onto the stack.
  • If there is only one value in the stack
    • That value is the result of the calculation.
  • If there are more values in the stack
    • (Error) The user input too many values.

Example

The infix expression "5 + ((1 + 2) * 4) − 3" can be written down like this in RPN:

5 1 2 + 4 * + 3 -

The expression is evaluated left-to-right, with the inputs interpreted as shown in the following table (the Stack is the list of values the algorithm is "keeping track of" after the Operation given in the middle column has taken place):

Input Operation Stack Comment
5 Push operand 5
1 Push operand 5, 1
2 Push operand 5, 1, 2
+ Add 5, 3 Pop two values (1, 2) and push result (3)
4 Push operand 5, 3, 4
* Multiply 5, 12 Pop two values (3, 4) and push result (12)
+ Add 17 Pop two values (5, 12) and push result (17)
3 Push operand 17, 3
− Subtract 14 Pop two values (17, 3) and push result (14)

When a computation is finished, its result remains as the top (and only) value in the stack; in this case, 14.

The above example could be rewritten by following the "chain calculation" method described by HP for their series of RPN calculators:

"As was demonstrated in the Algebraic mode, it is usually easier (less keystrokes) in working a problem like this to begin with the arithmetic operations inside the parentheses first."[1]

1 2 + 4 * 5 + 3 -

Converting from infix notation

Main article: Shunting yard algorithm

Edsger Dijkstra invented the "shunting yard" algorithm to convert infix expressions to postfix (RPN), so named because its operation resembles that of a railroad shunting yard.

There are other ways of producing postfix expressions from infix notation. Most Operator-precedence parsers can be modified to produce postfix expressions; in particular, once an abstract syntax tree has been constructed, the corresponding postfix expression is given by a simple post-order traversal of that tree.

Implementations

The first computers to implement architectures enabling RPN were the English Electric Company's KDF9 machine, which was announced in 1960 and delivered (i.e. made available commercially) in 1963, and the American Burroughs B5000, announced in 1961 and also delivered in 1963. One of the designers of the B5000, Robert S. Barton, later wrote that he developed RPN independently of Hamblin, sometime in 1958 while reading a textbook on symbolic logic, and before he was aware of Hamblin's work.

Friden introduced RPN to the desktop calculator market with the EC-130 in June of 1963. Hewlett-Packard (HP) engineers designed the 9100A Desktop Calculator in 1968 with RPN. This calculator popularized RPN among the scientific and engineering communities, even though early advertisements for the 9100A failed to mention RPN. The HP-35, the world's first handheld scientific calculator, used RPN in 1972, as did the HP-10C series of calculators, including the famous financial calculator, the HP-12C. When Hewlett-Packard introduced a later business calculator, the HP-19B, without RPN, feedback from financiers and others used to the 12-C compelled them to release the HP-19BII, which gave users the option of using algebraic notation or RPN.

Existing implementations using Reverse Polish notation include:

A Postfix evaluator implemented in Python

# Valid elements of input are binary operators, integers,
# and floating point numbers, separated by spaces.
#   e.g.  100 2 / 2 ** 3.14 *
stack = 
for i in raw_input('Input: ').split():
  if i-1.isdigit():
    stack.append(eval(i))
  else:
    if len(stack) < 2:
      quit('Error: Too few input values')
    else:
      value2 = stack.pop()
      value1 = stack.pop()
      stack.append(eval('value1 %s value2' % i))
if len(stack) > 1:
  quit('Error: Too many input values')
else:
  print 'Answer: %s' % stack0

See also

External links
© jGames.co.uk 2007 (some content from Wikipedia under GDL ) !-- ValueClick Media 468x60 and 728x90 Banner CODE for jgames.co.uk -->
Your Ad Here