ProductionDistillation
Today, most common essential oils, such as lavender, peppermint, and eucalyptus, are distilled. Raw plant material, consisting of the flowers, leaves, wood, bark, roots, seeds, or peel, is put into an alembic (distillation apparatus) over water. As the water is heated the steam passes through the plant material, vaporizing the volatile compounds. The vapors flow through a coil where they condense back to liquid, which is then collected in the receiving vessel. Most oils are distilled in a single process. One exception is Ylang-ylang (Cananga odorata), which takes 22 hours to complete through a fractional distillation. The recondensed water is referred to as a hydrosol, hydrolat, herbal distillate or plant water essence, which may be sold as another fragrant product. Popular hydrosols are rose water, lavender water, lemon balm, clary sage and orange blossom water. The use of herbal distillates in cosmetics is increasing. Some plant hydrosols have unpleasant smells and are therefore not sold. ExpressionMost citrus peel oils are expressed mechanically, or cold-pressed. Due to the large quantities of oil in citrus peel and the relatively low cost to grow and harvest the raw materials, citrus-fruit oils are cheaper than most other essential oils. Lemon or sweet orange oils that are obtained as by-products of the citrus industry are even cheaper. Prior to the discovery of distillation, all essential oils were extracted by pressing. Solvent extractionMost flowers contain too little volatile oil to undergo expression and their chemical components are too delicate and easily denatured by the high heat used in steam distillation. Instead, a solvent such as hexane or supercritical carbon dioxide is used to extract the oils. Extracts from hexane and other hydrophobic solvent are called concretes, which is a mixture of essential oil, waxes, resins, and other lipophilic (oil soluble) plant material. Although highly fragrant, concretes contain large quantities of non-fragrant waxes and resins. As such another solvent, often ethyl alcohol, which only dissolves the fragrant low-molecular weight compounds, is used to extract the fragrant oil from the concrete. The alcohol is removed by a second distillation, leaving behind the absolute. Supercritical carbon dioxide is used as a solvent in supercritical fluid extraction. This method has many benefits, including avoiding petrochemical residues in the product. It does not yield an absolute directly. The supercritical carbon dioxide will extract both the waxes and the essential oils that make up the concrete. Subsequent processing with liquid carbon dioxide, achieved in the same extractor by merely lowering the extraction temperature, will separate the waxes from the essential oils. This lower temperature process prevents the decomposition and denaturing of compounds and provides for a superior product. When the extraction is complete, the pressure is reduced to ambient and the carbon dioxide reverts back to a gas, leaving no residue. Although supercritical carbon dioxide is also used for making decaffeinated coffee, the actual process is different. Production quantitiesEstimates of total production of essential oils are difficult to obtain. One estimate, compiled from data in 1989, 1990 and 1994 from various sources gives the following total production, in tonnes, of essential oils for which more than 1,000 tonnes were produced.[1]
Essential oil use in aromatherapyAromatherapy is a form of alternative medicine, in which healing effects are ascribed to the aromatic compounds in essential oils and other plant extracts. Many common essential oils have medicinal properties that have been applied in folk medicine since ancient times and are still widely used today. For example, many essential oils have antiseptic properties.[2] Many are also claimed to have an uplifting effect on the mind. The claims are supported in some studies[3][4] and unconfirmed in others.[5] DilutionEssential oils are usually lipophilic (literally: "oil-loving") compounds that usually are not miscible with water. Instead, they can be diluted in solvents like pure ethanol (alcohol), polyethylene glycol, or oils. Raw MaterialsEssential oils are derived from various sections of plants. Some plants, like the bitter orange, are sources of several types of essential oil. Rose oilThe most well-known essential oil is probably rose oil, produced from the petals of Rosa damascena and Rosa centifolia. Steam-distilled rose oil is known as "rose otto" while the solvent extracted product is known as "rose absolute". DangersBecause of their concentrated nature, essential oils generally should not be applied directly to the skin in their undiluted or "neat" form. Some can cause severe irritation, or provoke an allergic reaction. Instead, essential oils should be blended with a vegetable-based "carrier" oil (a.k.a., a base, or "fixed" oil) before being applied. Common carrier oils include olive, almond, hazelnut and grapeseed. Common ratio of essential oil disbursed in a carrier oil is 0.5–3% (most under 10%), and depends on its intended purpose. Some essential oils, including many of the citrus peel oils, are photosensitizers (i.e., increasing the skin's vulnerability to sunlight, making it more likely to burn). Lavender oil, though generally considered the mildest essential oil, is cytotoxic to human skin cells[6]. Industrial users of essential oils should consult the material safety data sheets (MSDS) to determine the hazards and handling requirements of particular oils. GynecomastiaEstrogenic and antiandrogenic activity have been reported by in vitro study of tea tree oil and lavender essential oils. Case reports suggest that the oils may be implicated in some cases of gynecomastia, an abnormal breast tissue growth, in prepubescent boys.[7][8] Pesticide residuesThere is some concern about pesticide residues in essential oils, particularly those used therapeutically. For this reason, many practitioners of aromatherapy choose to buy organically produced oils. IngestionWhile some advocate the ingestion of essential oils for therapeutic purposes, this should never be done except under the supervision of a professional who is licensed to prescribe such treatment. Some very common essential oils such as Eucalyptus are extremely toxic internally. Pharmacopoeia standards for medicinal oils should be heeded. Essential oils should always be kept out of the reach of children. Some oils can be toxic to some domestic animals, cats in particular. Owners must ensure that their pets do not come into contact with potentially harmful essential oils.[9] The internal use of essential oils should be fully avoided during pregnancy without consulting with a licensed professional, as some can be abortifacients in dose 0.5–10 ml. SmokeThe smoke from burning essential oils may contain potential carcinogens, such as polycyclic aromatic hydrocarbons (PAHs). Essential oils are naturally high in volatile organic compounds (VOCs). Flammable LiquidThe flash point of an essential oil is different for each oil. Many of the common essential oils such as tea tree, lavender, and citrus oils are classed as a Class 3 Flammable Liquid as they have a flash point of 50-60 °C. Care should be taken when shipping essential oils to ensure the correct procedures are followed for transporting dangerous goods. ToxicologyLD50 of most essential oils or their main components are 0.5-10 g/kg (orally or skin test).citation needed Notes and references
Additional references
See also
| |