Energy amplifier

Energy amplifier
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Energy_amplifier".

content

It has been suggested that this article or section be merged with Subcritical reactor. (Discuss)

In nuclear physics, an energy amplifier is a novel type of nuclear power reactor, a subcritical reactor, in which an energetic particle beam is used to stimulate a reaction, which in turn releases enough energy to power the particle accelerator and leave an energy profit for power generation. The concept has more recently been referred to as an accelerator-driven system (ADS).

1 History
2 Principle and feasibility
3 Advantages
4 Disadvantages
5 See also
6 References
7 External links

History

The concept is credited to Carlo Rubbia, a nuclear physicist and former director of Europe's CERN international nuclear physics lab. He published a proposal for a power reactor based on a proton cyclotron accelerator with a beam energy of 800 MeV to 1 GeV, and a target with thorium as fuel and lead as a coolant.

Principle and feasibility

The energy amplifier uses a synchrotron accelerator to produce a beam of protons. These hit a heavy metal target such as lead, thorium or uranium and produce neutrons through the process of spallation. It might be possible to increase the neutron flux through the use of a neutron amplifier, a thin film of fissile material surrounding the spallation source. The use of neutron amplification in CANDU reactors has been proposed. While CANDU is a critical design, many of the concepts can be applied to a sub-critical system.^[1]^[2] Thorium nuclei absorb neutrons, thus breeding fissile uranium-233, an isotope of uranium which is not found in nature. Moderated neutrons produce U-233 fission, releasing energy.

This design is entirely plausible with currently available technology, but requires more study before it can be declared both practical and economical.

Advantages

The concept has several potential advantages over conventional nuclear fission reactors:

Subcritical design means that the reaction could not run away — if anything went wrong, the reaction would stop and the reactor would cool down. A meltdown could however occur if the ability to cool the core was lost.
Thorium is an abundant element — much more so than uranium — reducing strategic and political supply issues and eliminating costly and energy-intensive isotope separation. There is enough thorium to generate energy for at least several thousand years at current consumption rates.
The energy amplifier would produce very little plutonium, so the design is believed to be more proliferation-resistant than conventional nuclear power (although the question of uranium-233 as nuclear weapon material must be assessed carefully).
The possibility exists of using the reactor to consume plutonium, reducing the dangerously large world stockpile of the very-long-lived element.
Less long-lived radioactive waste is produced — the waste material would decay after 500 years to the radioactive level of coal ash.
No new science is required; the technologies to build the energy amplifier have all been demonstrated in the laboratory. Building an energy amplifier requires only some engineering effort, not fundamental research (unlike nuclear fusion proposals).
Power generation might be economical compared to current nuclear reactor designs if the total fuel cycle and decommissioning costs are considered.
The design could work on a relatively small scale, making it more suitable for countries without a well-developed power grid system
Inherent safety and safe fuel transport could make the technology more suitable for developing countries as well as in densely populated areas.

Disadvantages

General technical difficulties.
Each reactor needs its own facility (synchrotron) to generate the high energy proton beam, which is very costly.
No synchrotron of sufficient power (> ~12 MW) has ever been built. Currently, the Spallation Neutron Source utilizes a 1.44 MW proton beam to produce its neutrons, with upgrades envisioned to 5 MW.^[3]